Plumbing: This part of bathroom remodeling calls for a licensed professional. If you are not a licensed plumber, be sure you have one scheduled at the right time.
Once the primer has dried, you will apply the base coat. The first layer of base coat must be coated evenly and thoroughly all the way over the entire surface of the bathtub. Let this base coat dry thoroughly. Once the base coat is dry, you will be able to safely apply the topcoat. This topcoat is the finish for your price to reglaze tub and it will display what your tub will look like when you are finished. The choice of color for the bathtub is yours, just make sure to evenly apply the topcoat to make certain that the tub is given a great finish.
Floors: Most bathroom remodeling projects include some type of floor work. If reglazing tub, toilet, shower, or sink are to be moved, you will need plumbing changes. New holes will be made in your floor. You may need new sub floors. This step will probably follow the movement of walls.
You want to make sure that you invest wisely in a vessel sink. Sure, you might think that you just have to have the latest trends. This is an actual bathroom fixture, it's not as easy as changing a pair of blue jeans. If you do want to change out your bathroom a lot then just spend less money on the sink. This way you'll have money left over when you want to change it out or you get sick of it. Glass vessel sinks are typically a lot cheaper than copper or stone.
Next ensure that there is no oil on the surface of the tub in order to provide grip for the 'primer.' The third solution is a solvent that removes any remaining sediment and makes the surface ready for primer. The reducer must be applied with the help of paper towels. After leaving the solution for thirty minutes or so clean the area with the primer reducer and allow the bath tub restoration tub to dry. The tub should be rinsed again and again to ensure dryness.
Once the caulk bead is in place, smooth it out with your fingers and remove the excess. Make sure you wipe your fingers frequently so as not to get any caulk stuck to you. You can also you latex gloves if you feel that is safer. Once you are satisfied, remove the masking tape. The caulk must cure for at least 24 hours before you use the bathtub.
No matter what kind of tub you install, you'll want to inspect your work numerous times to make sure everything has been done correctly. After you're convinced everything is right, you'll need to run a bead of caulking around all tub edges that meet the wall and allow the caulking to cure for at least 24 hours before using the tub. Installed incorrectly, the tub can actually slide back off the ledgers while you or a loved one is bathing. You can never be too careful. If you aren't totally comfortable with the work you've done, find a professional plumber to help you out.